1. Most Common Heating Problems in Winter

    Your furnace is instrumental for your survival in these harsh and windy Chicago winters—it might just be the only thing that will keep your toes from turning into icicles. But the moment you truly need your furnace is usually the moment that it breaks down. So what is most likely to go wrong with your furnace?

    In this blog, the Chicago HVAC team at Aircor will take a look at the most common furnace problems during the winter season. Keep these problems in mind so you know exactly when to call your HVAC service team!

    Loss of Heat

    It’s a problem, alright. A sudden loss of heat in your home is obviously a huge issue in the winter months, and it can be caused by a variety of malfunctions: a loss of power to your furnace, a pilot light or ignition system failure, or a blown fuse, for example. A loss of heat could also be caused by a lack of communication or a miscommunication with the thermostat, which can trick your furnace into thinking the heat is supposed to be off when it’s supposed to be one.

    Whatever the case, a loss of heat defeats the purpose of a heater—call your local furnace repair team to get your things sorted out.

    Overcycling

    Your furnace cycles all the time—that’s how it saves energy and maintains the desired temperature within your home. However, your furnace can cycle too much and too often due to clogged air filters or thermostat problems, which can make make your home way too hot or not hot enough. Plus, too much cycling can put strain on the components of your furnace, leading to component damage.

    Replacing your clogged air filters should be your first course of action if you’re dealing with frequent and repeated cycling—but if that doesn’t solve the problem, it’s time to call the furnace maintenance professionals.

    Inconsistent Room Temperatures

    You walk into your kitchen, and it’s hotter than a billy goat with a blowtorch—but when you walk into your bedroom, it’s colder than a polar bear’s toenails. What gives? One of the most common heating problems during the winter is inconsistent room temperatures—an issue that is usually caused by air leaks and poor insulation throughout the home. Seams that allow cold air in also let warm air out, which could be the reason you’re feeling varying temperatures from room to room. To fix this problem, using caulking solution to seal up seams and prevent air from entering or leaving your house, and make sure your doors are properly aligned and sealed with weatherstripping so you’re not letting all of that HVAC air out of your home.

    If your home is seaworthy, but you’re still dealing with inconsistent temperatures from room to room, you probably have a vent issue on your hands. Call the heating repair team in your area so they can take a look.

    Banging, Cracking, & Other Noises

    Furnaces will always make a little bit of noise—that’s just what moving parts of machinery do. However, if your furnace is making unusual noises aside from the normal hum, such as rattles, whistles, or loud banging, it could be a sign of a problem with your furnace. There are approximately 7849349672 reasons why your furnace could be making strange noises, including broken or faulty components, clogged air filters, thermostat issues, or ignition and pilot light fails, to name a few—have a heater maintenance crew check things out to find the real reason your heater is being so loud.

    Carbon Monoxide

    Carbon monoxide development is a fairly common problem with furnaces—and it’s also a deadly problem. When cracks develop near the heat exchange of your furnace, carbon monoxide leaks out—and this colorless, odorless, and tasteless gas can only be detected with a carbon monoxide detector once it enters your home.

    Cracks usually develop after 10 to 15 years of furnace use—it’s important to have a heater service technician inspect your furnace every year so you can avoid potentially fatal consequences.

    When do I need a new furnace?

    Homeowners are often unsure about whether it’s time to repair or replace their furnace—and ultimately, it’s up to a furnace maintenance professional to make that call. That’s where Aircor can help. Our furnace technicians can install, repair, and replace furnaces and make sure your air is warm, clean, and safe. Schedule an appointment with us today!

  2. Why Is My House So Cold?

    Brrrrrr! It’s not just cold right now—it’s Chicago cold. The Midwestern breeze can slice through the best parka or wool socks, and it can certainly break into your home. But how, exactly, does all that cold air get inside? Why is it that your house always seems cold, even when you’re cranking up the heat?

    In this blog, the Chicago HVAC professionals at Aircor will take a look at steps you can take to keep your house warm. Spoiler alert: you’re probably overlooking at least two thirds of these steps. Take care of these tasks, and your home will become warmer instantly, which will increase your level of comfort and lower your energy bill to boot!

    Step 1 – Check Your Windows & Doors

    If your home was built before 1990, it probably doesn’t have any sort of energy efficient windows or doors—and that could be a big reason why your home is seemingly cold all the time. Doors and windows with poor seals can let cold air in and warm air out, which makes your crank up your heater, and in turn, your energy bill—you’ll need to seal up these areas in order to keep all that hard-earned warm air you paid for inside of your home.

    While a complete window replacement would be the most effective option, replacing the seals on the bottoms of your windows and using thermal curtains will help slow down the rate at which cold air enters your home, and it’ll make sure you don’t have to turn up your heat quite as high when things cool off in the evenings. Be sure to realign your doors and replace their weatherstirpping as well—a drafty door is the most common culprit for air leakage in the home.

    Step 2 – Close Your Fireplace Damper

    Your fireplace damper opens and shuts to direct the flow of air from the inside to the outside—so when you leave it all the way open when you don’t have a fire in your firebox, all of the warm air in your home is literally being pulled up and out of your chimney. Easy solution here: go ahead and shut that damper all the way—but don’t forget to open it back up whenever you’re about to make a fire. Otherwise, you’ll be in for a smoky surprise.

    Step 3 – Change Up Your Ceiling Fans

    What if we told you that you could change the direction of your ceiling fans? Would you believe us? You should—changing the direction of your fans has a direct effect on how heat is dispersed throughout your home. Turn your fans clockwise, and you’ll push your warm air straight up toward the ceiling—not ideal when you’re trying get warm in your bed. But turn that bad boy to counterclockwise, and the blades will push your hot air down exactly where you want it. Mmmm… warm.

    So how do you achieve the magical feat of switching the direction of your ceiling fans? It’s easier than you think: just take a look at the middle of your fan, find the tiny switch, and flip it between clockwise and counterclockwise. Easy AND breezy.

    Step 4 – Install a Whole House Humidifier

    Your home should rest at around 40-45 percent humidity during the winter—but oftentimes, your heating system can suck the moisture out of your indoor air, which can actually make cold temperatures feel even colder. To solve this problem, place humidifiers throughout your home, or even better, have a whole house humidifier installed to make sure your home is perfectly humid in every room.


    That’s it for Part 1 of our series on why your house is so cold. Stay tuned for Part 2, and check out our other blog posts in the meantime!

  3. Tips for Home Comfort (And Energy Savings) This Winter

    Winter is coming here, and your comfort in your home is as important as ever. But how do you keep your home warm and cozy when that icy Chicago wind rolls through? In this blog, the Chicago HVAC specialists at Aircor will give you a few tips for keeping your home perfectly toasty this winter. With the right tools and strategies, you’ll enjoy your time in your home and save money on your energy bill to boot!

    Keep things insulated.

    The biggest battle you’ll face during the winter isn’t just about keeping the cold air out—it’s about keeping the warm air in. If your home is full of cracks and gaps, you’ll be losing all of that comfy and cozy air, and you’ll force your HVAC unit to work harder in order to produce a suitable amount of heat. This can cause damage to your HVAC system, and it’ll spike your energy bill, too.

    To prevent this problem, you’ll need to seal up the cracks and keep your home properly insulated. First, use caulking solution to seal up draft-prone seams around vents and pipes. Next, adjust your doors and use door stops and seals to ensure tight fits between doors and frames (this is a common area for drafts). Finally, use thermal curtains on your windows to slow the rate at which cold air enters your home. These steps will make your home more airtight than ever before, and will ensure your HVAC system doesn’t have to work too hard to heat up your home.

    Practice proper thermostat habits.

    For every degree you set your thermostat over 78 degrees in the summer, you’ll save around seven percent on your energy bill—per degree. Those are huge savings! The same concept still applies in the winter as well—so instead of jacking your heater up to 85 degrees to keep things warm, try keeping your thermostat at around 68 degrees while you’re at home.

    We get it—68 just doesn’t sound toasty enough. But it’ll keep your home at a consistently livable temperature, and you’ll save plenty of money in the process. The closer you set your thermostat to the outdoor temperature, the less energy you’ll consume—and that could save you 15 to 20 percent per year on your bill!

    Install a programmable thermostat.

    While setting your thermostat at a reasonable temperature is fine and dandy while you’re home, what happens when you’re not home? For some folks, coming home to an icy cold house is fine—but for others, well, they’d rather run that thermostat all day long (and pay the price for it) so they can come home to comfortable temperatures.

    Fortunately, there’s a better way: using a programmable thermostat. Instead of leaving your thermostat running or icing out your entire home, you can use your smartphone or other mobile device to create a schedule for your thermostat so you can have a comfortable home and maximum energy savings. Schedule your thermostat to turn off (or to a lower temperature) right before you leave for work, and then 20 minutes before you get home at the end of the day, schedule it to turn up the heat a bit so you can walk inside and take your shoes off without your toes freezing solid. You’ll save 7-10 percent on your energy bill, and you’ll always have the comfortable home you desire!

    Have your HVAC system serviced.

    It doesn’t matter how perfectly insulated your home is, or how efficient your thermostat usage is—if your HVAC system hasn’t been cleaned and serviced for awhile, you’re not going to get the warm air you want, and you’ll end up paying a premium on energy. You need experienced HVAC professionals to keep your HVAC system in good shape—and that’s where Aircor can help. Our friendly HVAC technicians can prepare your heating system for winter so you can maximize your savings and stay comfortable all winter long. Get started with us today!

  4. Take Advantage of Government Tax Credits to Install Energy-Efficient Systems and Green the Environment

    23

    The federal government provides incentives for installing energy-efficient HVAC systems. Its Department of Energy offers a package of energy-efficient tax credits for not only HVAC systems but also any other energy-savings enhancements, like storm windows and weather-stripping. The breakdown is as follows:

    Credit Maximum

    You may claim a lifetime credit maximum of 10% on your expenses to purchase and install an HVAC system, or any other energy-savings enhancements. The amount you can claim is capped at $500.00.

    Filing for the Lifetime Credit Maximum

    You can download IRS Form 5659 to file with your income tax return. Anything to do with the IRS; the devil is in the details, so don’t overlook any instructions, or you may not be considered eligible, according to their nit-picking bureaucratic processes

    Time Limit

    The time period to install an energy-tax-credit-eligible HVAC system expires on January 1, 2017. This means you must file by December 31, 2106.

    Documentation

    Keep the manufacturers’ warranties, certifications, and purchase receipts. You may need them to file the IRS Form 5659.

    Exceptions

    There are exceptions to the $500 credit limit and they are listed below:

    1. For a state-of-the-art main air-circulating fan the credit is capped at $50.00
    1. For an eligible oil furnace or hot water boiler, propane, and natural gas units $150.00 is the maximum you can claim.

    In the category of energy-efficient eligible products items would include central air conditioners and geothermal pumps, as well as the items listed in 2. The cap is $300.00. But please check on all this information, which is the most accurate available to date. Because it’s hard to keep up with the IRS guidelines as they are subject to change without warning for the consumer.

    Energy Star

    Energy Star on its website lists guidelines on the HVAC systems the federal government covers. Not every Energy Star-certified product is eligible for the energy-efficient tax credit. Energy Star is a reliable resource you can turn to for the correct information, in lieu of some contractors, who remain ignorant of the finer points of the energy-efficient tax credit program. Don’t depend on them. They will say anything to make a sale.

    Energy Efficiency and Your Pocketbook

    With the incentive to upgrade to green-energy HVAC products it is possible to lower your energy bills as much as 20% yearly. The average annual savings amounts to about $200.00.

    Your initial outlay will cost you but keep in mind the energy-savings down the road that will bring a return on investment. For a high-efficiency heating system expect to pay about $3,500 inclusive of installation, whereas a conventional heating system will set you back around $2,400.

    Exclusions on Heating Units

    Purchasing an Energy Star-certified product does not guarantee you can claim the energy-efficient tax credit in all cases. There are standards to be met to get the energy-efficient tax credit. The annual fuel utilization efficiency (AFUE) rating must exceed a conventional heating system’s AFUE. For Energy Star-certified oil furnaces they must rate at 85% energy-efficiency, while some gas furnaces need to burn fuel at 90% efficiency.

    The Department of Energy asks for even higher AFUE ratings to claim the energy-efficiency tax credit: for natural or propane gas furnaces 95% and oil furnaces 95%. Boilers must also consume energy at an AFUE rating of 95%.

    Central Air Conditioner SEER Ratings

    Cooling system ratings known as seasonal energy-efficiency ratio (SEER) and energy-efficient ratio (EER) are Energy Star standards. The ratings vary according to the type of system: split system ratings are SEER 16-plus and EER 13-plus. For package systems, SEER 14-plus and EER 12-plus. These efficiency standards can change without notice, so double-check them on the Energy Star website.

    Return on Investment

    It usually takes about 10 years in energy-efficient savings to compensate for the expense of investing in new heating and cooling systems. But this time period can alter significantly if there are changes in fuel prices. A value-added benefit, although not evident in your initial investment in an HVAC product, is the reduction of your carbon footprint on the environment, as well as a more comfortable indoor environment for you and your family.

    Another benefit to consider is when you sell your home. It’s not that the few thousand dollars you’ve spent to buy a heating system will translate to an increase in your home’s sale price. Potential savings will come in the form of a trade-off with some buyers. This means buyers may not ask that you repair your HVAC system, or bargain for a credit as long as your HVAC system is up to snuff.

    Other Energy-Efficient Tax Credits

    There are two categories under which you may qualify for a tax credit when you make home improvements:

    1. Non-Business Energy Property Credit
    2. Residential Energy-Efficient Property Credit

    Non-Business Energy Property Credit for Eligible Property

    Homeowners can deduct 10% on the cost of the following products, exclusive of labor / installation expenses:

    • Any energy-efficient insulation material
    • Storm windows and doors (conditions apply)
    • Energy-efficient roofing materials
    • Central cooling units (limit: $300)
    • Heating units (boilers) for hot water, natural gas, and propane
    • Heating units (furnaces) (limit: $300)
    • State-of-the-art fans (for propane, oil, and natural gas heating units)
    • Biomass fuel stoves

    Non-Business Energy Property Credit caps the lifetime credit at $500

    Here are some more energy-efficient items you can claim for a tax credit:

    • Storm windows (limit: $200)
    • State-of-the-art air-circulating fan (limit: $50)
    • Eligible fuels: oil furnace (propane and natural gas); hot water boiler (limit: $150)

    Residential Energy-Efficient Property Credit for Eligible Property

    Green-energy products are incentivized at 30% of the purchase price. This tax credit has no cap in many cases, the exception being fuel cell property, capped at $500 depending on kilowatt usage.

  5. Heating System Tune-Ups: Do You Call an HVAC Professional or do it Yourself?

    AircorDealer_Couple_horiz_F95_dh2504_180316085817

    The fall and winter months are when your heating bills start to climb to an unhealthy level. According to those, who track and compile data on energy usage the standard cost of providing heat to consumers was approximately $1,000 in 2010. Is it any wonder that folks are reluctant to raid their bank accounts for more money to get a professional tune-up for their heating systems? However, there are six good reasons to hire an HVAC repair and maintenance technician to perform an annual tune-up on your heating system.

    1. Airflow. If the airflow of your furnace is hindered it will have to work harder and require more repairs as it ages. Its life expectancy will also be cut short.
    1. Safety Concerns. The burning of fuel must be regulated for the safe and efficient operation of your heating system. Carbon monoxide, a potentially dangerous gas, can cause serious health conditions and even death in the most extreme cases. Its level must be checked to avoid harm to you and your family.
    1. Fewer Repairs. Finding minor problems during an annual checkup will put the kibosh on them, and avoid having them develop into bigger problems and more repair expense.
    1. Avoids a Major Inconvenience. Getting an annual tune-up done before the full impact of cold winter days and nights arrives will avoid having to put in an emergency call to an HVAC repair technician. You may have trouble finding a professional to come out as soon as possible because other people in your community may be having heating system breakdowns as well. Emergency repairs also cost more.

    This is why it’s a good idea to buy a service contract with a priority maintenance clause (PMC) included in it. With a PMC there are HVAC repair technicians on-call 24 / 7 to deliver prompt services in the event of an emergency breakdown of your heating system.

    1. Increases Operation Efficiency of Your Furnace. The cleaning and checking of your heating system’s burner and heat exchanger will keep it running safely and efficiently during those harsh and cold winter months.
    1. Honoring the Manufacturer’s Warranty. Many furnace manufacturers demand that you routinely perform maintenance work on your heating system, or else you will risk voiding the warranty. Having an annual tune-up done professionally by an HVAC maintenance technician will meet the requirement and keep your warranty in force.

    You’re saying okay, I get it. But can’t I do this myself? Well no, HVAC maintenance and repair technicians are the ones, who have the training and certifications necessary, to inspect your HVAC heating system; perform maintenance work; troubleshoot problems and repair them; and help you extend the lifespan of your heating system. And they know just what to look for during an inspection to keep you and your family safe from harm: for example, carbon monoxide levels if too high could leak the potentially fatal gas into your living quarters, causing serious health conditions and in some cases death. This alone is enough of a reason to get an annual tune-up of your heating system.

    We’re playing devil’s advocate here for a practical reason. You may be a homeowner, who can’t tell a screwdriver from a wrench, but if you’re technically inclined: for instance, you revel in working on your car; your mechanical skills could be easily transferred to doing a furnace tune-up, another mechanical job. If you’re gung-ho about learning how to do a tune-up on your heating system, here are some basic guidelines on the procedures.

    Heating System Infrastructure and How it Functions

    To start, let’s talk about what makes up your home heating system, and how it works.

    There are three components: (1) the heat sensor (commonly known as the thermostat), which calibrates your home’s temperature. As soon as the temperature decreases the (2) blower kicks in, which ignites the burner, creating combustion. The blower causes the air to travel over the (3) heat exchanger, which increases the heat exchanger’s temperature, delivering it all through your home, using the heating ducts. The cool air still in the room is cycled back to your furnace, using return ducts where the warming process begins again. The warm- and cool-air cycles keep on going until the temperature level reaches the thermostat setting you have selected. At this point the thermostat sends a message to the furnace to turn off.

    Take a Look under the Hood

    Begin by examining your furnace. If you find signs of black soot or traces of heater debris, it’s a bad sign. To troubleshoot this problem further, raise the thermostat to turn on your furnace, then inspect the burner flames. You should be seeing flames that are constant and blue. If you see flames that are either orange or yellow and fluttering, stop right there. It’s time to call in a heating repair specialist to solve either or both of these issues. If your furnace passes the soot and burner-flame test, you can move on to the next step, cleaning.

    Cleaning Your Furnace

    Lower your thermostat and let your heating system cool down. It’s also best to exercise caution and shut off your circuit breaker, which powers your furnace. Once your furnace has cooled completely pull off its side panels, and using a long-nozzle vacuum attachment suck up whatever dust has built up. You can use a moist cloth to remove dust from the blower fan blades, and other places too remote for the vacuum nozzle to access. If you’ve got an older-model furnace you need to examine your blower fan’s oil cups, which are placed at both terminals of the central shaft. Apply a little oil to them.

    Repairing Your Furnace

    Depending on your furnace model, it may contain either a direct-drive or a fan-belt drive. If the first is the case you need not do anything. If it’s the latter inspect the fan belt to see how it looks. Check underneath the fan belt to see if there are any cracks, a symptom of its being dried out by the heat. A deteriorated fan belt needs replacement at this point. Just make sure you purchase one with the same dimensions.

    Inspecting the belt’s tension is a simple procedure. Just press on it in a downward direction. If it is correctly adjusted you should see approximately a half-inch of motion. If over or below, you can calibrate the tension. Slacken the mounts on the electric motor, shifting the motor to obtain the correct tension.

    Reassembling the Furnace

    A piece of cake, you just put back on the side panels and turn on the circuit breaker.

    A Little Maintenance Tip

    During the cold months it’s good maintenance to replace your furnace’s filter every month. Be proactive though and start with a new filter before the weather turns cold.

    Even though you can perform an annual tune-up yourself, maintaining your furnace’s efficient operation, having an HVAC pro come out every three to four years is a wise use of your money. The reason for this is HVAC specialists are skilled in detecting components that can deteriorate as your heating system ages. Using specialized tools they can check to see if those components are still operating as they should.

    The bottom line is to use your best judgment when deciding whether or not to perform a tune-up on your heating system, or call in an HVAC repair and maintenance technician.

  6. Smart Thermostats Manage Your Home Environment for More Ease and Comfort

    3

    I don’t need to tell you that heating and cooling system utility bills are astronomically high. You already know. But did you know energy-consumption waste is the main culprit in driving up your energy bills? There are many steps you can take to lower your energy bill, among them sealing leaks to prevent cold air from entering your living space; using the sun to keep your home warmer during the day; shielding your windows and doors from drafts; weather-stripping to prevent cold air from entering, and more.

    Programmable Thermostats: Energy-Efficiency in Action

    One of the key ways to also conserve energy consumption is to calibrate your thermostat at night, and when you are away from home. Performing this step will save you anywhere from 12%–15% off your power bill. The drawback to manually setting and re-setting your thermostat is that you will still come home to a house that is uncomfortably cold or hot. This is why purchasing a programmable thermostat is a wise decision in terms of allowing you to designate at what times you desire your thermostat to be turned on and off, day or night, at home or away from home. Two other benefits of using a programmable thermostat are: (1) it will help to lower your energy bill and (2) lengthen the life of your HVAC units.

    Many consumers in general think a programmable thermostat and a smart thermostat are one and the same, but they’re not. Programmable thermostats can determine temperature regulation, which delivers the benefits of energy conservation, known as smart technology. However, a smart thermostat has an additional feature called auto scheduling, which allows you to program it. This means if the daily routines of your family are run on a consistent schedule, auto scheduling, using the settings you enter into the smart thermostat will take over, relieving you of manually needing to set and re-set your thermostat. In addition, if your family’s schedules are not predictable from one day to the next the smart thermostat will become aware of the comings and goings of family members, and adjust temperature regulation accordingly. In fact, as time passes the smart thermostat will monitor your home’s temperature with more accuracy. A smart thermostat has built-in flexibility in that you needn’t use the smart technology if it doesn’t suit your lifestyle.

    Temperature Management

    Top-of-the-line digital thermostats are masters at controlling temperatures of all HVAC units. The best models on the market support programmable fans on your AC unit. Once the compressor shuts down the programmable fan will continue to operate for a short duration, using the remaining cold air in your AC unit, or pull in fresh air from outside your house. This is energy efficiency at its best. Another smart thermostat feature is auto changeover, which permits the thermostat to switch back and forth between cooling and heating functions as necessary.

    Energy Savings through Efficiency Features

    Here are some pointers on what to look for in a smart thermostat to help save energy consumption:

    Temperature Deviation

    Standard digital thermostats have a deviation of one degree or less. This is beneficial in that you get optimal comfort but your HVAC unit will turn on and off more often, causing your HVAC unit to run harder, shortening its lifespan. In terms of energy efficiency you would be well advised to choose a digital thermostat, whose deviation is wider because it will consume less energy. And why? The temperature will alter more before the HVAC unit is initiated.

    One-Phase vs. Multi-Phase

    A one-phase digital thermostat is limited to just shutting on and off. But if this meets your needs, go with a one-phase digital thermostat. However, a multi-phase digital thermostat has three automated heating levels: low, medium, and high. It is programmed to automatically proceed from level one to level two to level three to quickly heat up your home as necessary, until the optimal comfort temperature has been reached.

    Energy Saving through Auto Scheduling

    Digital thermostats in general are made to save energy, their reason for being. But the best ones have auto scheduling. Not only can auto scheduling determine your family’s daily routines and habits, but can also monitor weather patterns in your area. The smart thermostat can also find out about your preferences.

    Geofencing

    Smart thermostats’ motion sensors permit your HVAC systems to identify and respond on days when you arrive home earlier or later than you normally do. The way the geofencing feature works is it secures an area around the perimeter of your house that integrates with the location of your smart phone. Your smart thermostat will switch to an away setting as you move beyond your house’s geofencing area and return to its usual setting, warming your home to a comfortable level by the time you enter your house. The benefit is that no energy is expended in cooling or heating your house while no one’s home.

    Home Automation System

    If you have a home automation system (HAS), find out if the smart thermostat you’re interested in buying will be compatible with your HAS. The smart thermostat’s Wi-Fi feature will integrate with your iPad or smart phone, enabling you to adjust settings whenever, wherever, or however long you are away from your home.

    DIY or Professional HVAC Installation?

    You have the choice to either have your smart thermostat professionally installed, or perform the installation yourself, even on the premier models. If you decide you’d like to take on the challenge of doing the installation yourself, your best bet is to seek out a manufacturer that provides self-installation tutorials. If you want to ensure you get the right smart thermostat for your HVAC units, look for a company that has an online tool to see if the digital thermostat you’re considering is compatible with the HVAC units in your home.

    Tech Support

    The best-quality smart thermostat companies provide a variety of resources to turn to, regarding the installation, operation, and troubleshooting of your digital thermostat. The customer care choices can range from email to phone to live-chat tech support. Some manufacturers also host online forums where you can interact with technical support professionals, as well as other users about software issues, or the operation of your smart thermostat. The more resources a company provides the better for you because you can draw from a breadth of knowledge to find the solution to any software problem you may be experiencing.

    Another strong selling point for buying the best digital thermostats is the length of their warranties, which can range anywhere from two to five years.

    Today energy-efficiency is important, not only in terms of lowering your power bills, but also in preventing your heating and cooling systems from working overtime, making them last longer.

  7. How to Finance Your New HVAC System: The Choices are Plentiful

    AircorA-DlrPhoto_Couple_wDealer_outs_300415211249

    Buying a new HVAC system, or any kind of energy-efficient product can cost anywhere from $2,400 to $7,000 approximately. Such a major investment will pay off in the future as lower energy bills will compensate for your initial investment. Plunking down so much cash could give you pause, especially if you believe your current HVAC system can make it another few years. But many kinds of financing assistance are available to help you pay for a new HVAC system.

    Manufacturer Rebates Help with Financing

    Many different kinds of rebates exist for homeowners wishing to buy an updated HVAC piece of equipment. Oftentimes an HVAC manufacturer will provide a rebate on a new HVAC system you’ve purchased. These rebates will help to defray the expense of a new HVAC model as well as the cost to install your new HVAC unit. Your local utility company may also offer a rebate on an energy-efficient HVAC unit.

    Manufacturer Financing

    HVAC companies want to sell you their products, and are willing in many instances to provide financing. Financing can come through the use of a credit card that helps you make the most affordable monthly payment towards the purchase of a new HVAC system. There may also be promotional deals, a line of credit (if you qualify), and the tools to manage your account online. Another incentive some HVAC manufacturers provide for financing is you will not be penalized for paying off your purchase early.

    More Financing Choices

    Manufacturer and utility company rebates are only part of the financing picture. The federal government through its partnership with the Environmental Protection Agency (EPA) and the Department of Energy (DOE), offers federal grants and tax credits to assist you in upgrading your present heating or cooling systems, to make them more energy-efficient, as well as the installation of an energy-efficient new model.

    Following is a run-down of federal and state programs that you can apply to to receive grants, or tax credits on an upgraded or new HVAC system:

    Government and Green Energy

    If you invest in solar-powered and geothermal energy the federal government, in its efforts to encourage the use of green-energy products, will allow you to deduct the cost of upgrading your HVAC system to environmental-friendly sources of clean energy, instead of relying on fossil fuels.

    Energy Star Tax Incentive

    Energy Star, a program promoted by the EPA and DOE, is the best known and well-received energy tax credit you can use to apply for deductions on your annual income tax return. The Energy Star Tax Credit can be given to anyone that has bought a new AC unit, as much as $300. But a note of caution: it is not available for every AC unit on the market. So please be sure to inquire of your heating and cooling installation technician that your new heating and cooling units qualify as eligible for the Energy Star credit.

    Limited Federal Energy Tax Credits

    We say limited because Congress did not renew the many federal energy tax credits that are incentives for consumers to purchase new energy-efficient products. In particular Congress let the 25C Residential Energy Tax Credit for high-efficiency HVAC products fall by the wayside.

    But there still exist some grant programs, administered by the federal government, which will generously compensate consumers for new HVAC products. For example, those who live on fixed or low incomes, and find it necessary to buy a new HVAC unit are eligible for the Weatherization Program HVAC Tax Credit, funded by the DOE. DOE will pay 100% on the purchase of a new heating and cooling system. In addition eligible homeowners can be the recipients of grants to help pay for weatherization services. This can include new window installation, or installing weather-stripping around doors. Weatherization grants on average are $6,500, plus the DOE throws in the weatherization services for free.

    The Department of Housing and Urban Development (HUD) administers a Community Entitlement Grants (CEG) program in urban areas with populations ranging from 50,000–200,000 homes. HUD’s mandate is to replace outworn AC units with energy-efficient models.

    The U.S. Department of Agriculture (USDA) funds the Housing Preservation Grant Program (HPGP). The focus of this initiative is to offer financial help to homeowners, who want to make repairs or remodel their homes. HPGP targets communities, whose population is under 20,000.

    State-Sponsored Programs

    There exists no one-size-fits-all tax credit program for state governments to administer. Each state legislates its own version of an energy tax credit program. In many states the energy tax credit is targeted to assist homeowners in upgrading their heating and / or cooling systems. The energy tax credit can also be utilized to install a new green-energy HVAC unit.

    Still More Financing Options

    Yet another financing option for you to consider is a home equity line of credit. Find out from your mortgage holder if you meet eligibility requirements for a line of credit. The financing terms will be set according to the equity you have built up in your house, and the state of your finances.

    Also an option exists to get a personal loan from a bank at which you’ve been a long-standing customer, another way to go to finance a new HVAC system. A financial adviser is the best person to review your carefully-assembled documentation and decide what kind of loan will work best for you, and whether the loan will be secured or unsecured.

    The housing department, a local agency in your area, is also a good resource as well for a low-interest loan. What the housing department does is first decide if you meet its eligibility requirements for a new HVAC system. If you qualify the housing department will secure the loan for you with the lender. You may benefit from a lower interest rate as lenders will risk less in offering you this type of secured loan.

    You may find financing for your new HVAC system right in your own backyard from HVAC companies, who’ve provided you with price quotes. Find out if they offer financing (major contactors usually do). If you’re in relatively good financial shape you may qualify for terms, comparable to a personal loan from a bank.

    The Steps to Financing Your HVAC System

    The first order of business is to decide how much cash you can lay out to spend on a new heating or cooling system. If your present system has gasped its last breath, or you’re wanting to get a new HVAC system for its energy-efficiency benefits, many choices are out there by which you can finance a heating and cooling system.

    To position yourself to find the prime choices, your credit score must be above average, and your income adequate enough to meet the monthly payments, as well as covering your other current debts.

    If you’ve jumped through these hoops successfully, assemble a monthly budget containing an itemization of expenses. From this aggregate of monthly expenses make a decision on what you think you can comfortably afford.

    To prepare what might be asked of you when contacting various loaning institutions for a financing loan do the following:

    • Assemble your most recent pay stubs from the last few months. For those who run their own businesses, a copy of your last year’s tax return will suffice to prove income eligibility.
    • Look into your credit report to see that your payment status is current on every account. For debts that are paid in installments make extra payments on the ones you can to lower your debt in relationship to your income. Any invalid accounts you run across on your credit report, contact all three of the largest credit bureaus to request removal of those accounts. Support your request by providing documentation that substantiates why those accounts should not be on your credit report.

    Letters of reference from energy companies that you have a history with of making utility payments on time will prove you are a responsible bill-payer. This would only need to be done if you either have a low credit score, or have not built up enough of a credit history. If you have established enough of a credit history with other creditors include this in your loan application.

  8. 13 Energy-Saving Tips to Lower Your Utility Bills

    AircorADealerCoupleKitchenTable001_300415215518

    It’s easy for heating costs to shoot through the roof during the year’s coldest months. But there’s a lot you can do to increase the energy-efficiency of your home, using simple materials and straightforward procedures. But one area you can’t stint on in terms of cost is your heating system, our number 2 tip to help increase energy-savings in the long run. Otherwise read on to see what proactive measures you can take to make your home the most energy-efficient it can possibly be.

    1. Keep Your Heating Appliances and Heating Systems in A-One Condition

    Take proactive measures to maintain your heat-burning appliances and heating systems. For wood- and pellet-burning stoves and heaters you can perform a couple of maintenance steps: (1) for substance-burning appliances clean the flue vent on a regular basis, and (2) use a wire brush to routinely clean the interior of the appliance.

    For your heating systems as well as your gas fireplace put in a service call to an HVAC repair and maintenance technician. The expense will be worth it because with a comprehensive check and tune-up of your HVAC systems you will extend the life of them, and in addition save hundreds of dollars in repairs and power bills over time.

    The HVAC repair and maintenance technician will perform such tasks as an inspection of your heating system or gas fireplace, preventive maintenance, and note what components, if any, need repairing or replacing. They will also perform a safety check, such as seeing if there appear to be at all carbon monoxide or gas leaks. Some HVAC manufacturers will void the warranty on your equipment if yearly and ongoing maintenance is not done.

    1. Calibrate the Thermostat

    During the day and when you’re away from home for extended periods get in the habit of re-calibrating your thermostat to 10 to 15 degrees lower. If you tend to be a forgetful sort there are programmable (also known as smart thermostats) that can do the job for you. Smart thermostats can give you a cost-savings of at least 10% or over on your power bill. A standard smart thermostat costs as low as $25 and under. If you want to save even more buy a premium-model thermostat. Its price point will set you back at over $200, but additional cost-savings on your power bill at 12% for heating and 15% for cooling can compensate for the initial outlay of cash.

    Here’s a factoid to encourage your efforts to save on your heating bill: it’s a falsehood if you set the temperature lower on your heating system that it will struggle more to warm your home, thus increasing your energy bill. The opposite is true: you will experience cost-savings.

    1. Seal Leaks around Your Home

    There are many places in your home where cold air can enter. Sealing such things as ductwork, the open spaces around pipes, chimneys, and recessed ceiling lights will prevent cold air from entering your home.

    Examine the ducts to see if their corners and seams have loosened. If you use a forced-air heating system that is standard in most homes approximately 20%–30% of heated air is lost flowing out holes, leaks, and coming-apart ducts. The solution is to use an appropriate sealant on them to rectify the problem.

    1. Use the Sun to Help Heat Your Home

    Even though the temperature is frigid outside your home you can use the heat of the sun, penetrating southern-facing windows during daylight hours to provide heat to your home, preventing the need to turn on your heating system as often. At night you can draw the drapes closed to protect your home from windows that have grown cold. Don’t forget to clear tree branches loitering close by your window as well as plant life, obscuring the sun to optimize the benefits of sunlight to heat your home.

    1. Shield Your Windows and Doors

    Did you know cold and drafty windows in your home can account for 25% heat loss? This is an area that begs for intervention and insulation from the elements, invading your home’s interior. There are two methods to solve the problem: (1) a weighty clear plastic sheet or (2) a clear plastic film taped to the pane to form a tight seal, to be installed on the interior side of the pane. Don’t forget to include sliding-glass doors also. The cost-savings on your power bills, using these preventive measures will amount to approximately 14%. Clear plastic film is well under $10 for a 63 x 84-inch roll, found at your home improvement center. If you still feel a draft you can double-down by using close-fitting protective drapes, even close-fitting shades.

    1. Weather-Strip Your Windows and Doors

    Replace old and ragged weather-stripping around your windows and doors because the worn-out material is producing drafts, and allowing cold air into the interior of your home. Statistics reveal 7%–12% heat loss comes from doors and windows not properly protected. What happens is people bump up their heating system to stay warm and inadvertently bump up their power bills as well. The loss of warm air–whether or not the heating system is set higher–forces it to struggle more to heat your living spaces. As an alternative method you can caulk around your windows and doors. Be aware weather-stripping needs replacement every three or four years because of punishment from the elements. And caulking can become weatherworn also.

    1. Adjust Your Door Thresholds

    Are you aware that your entryway door can cause you to lose heat? The way to know if this is the case is to check for daylight under the door. If you see light this means the door is not flush with the threshold enough so air is passing underneath the door. A simple method exists to contract the opening to prevent cold air and drafts from trespassing into your home. If you have a threshold metal strip or other material the strip contains screws you can use to change the width of the opening and close the gap. All you need to do is unscrew the hardware enough to block out the light coming through.

    1. Electrical Boxes a Site for Drafts

    Your outside walls are one of the prime places where drafts can enter your home through your electrical boxes. Insulation may be haphazardly installed, creating pockets where air can travel behind the box and from end-to-end.

    To resolve the air leaks caused by the faulty installation of insulation do the following:

    Take off the cover plates and use acrylic latex caulking for sealing small pockets. If the opening is large foam sealant is the material you should use. To protect outlets or switches from allowing cold air to pass through them also, cover them with an inexpensive foam gasket and put the cover plates back on. Protecting this equipment from cold air drafts will pay big returns in the months and years ahead in cost-savings on your power bills.

    1. Seal Spaces in Your Outside Walls

    We’ve already talked about the need to caulk around pipes, protruding through drywall, plywood, or other material used to hold them in place inside your home. The same applies to pipes on the outside of your home, as well as power cables and gas lines. They frequently contain spaces around them incompletely sealed with caulking material. The problem is caulking doesn’t last against the weather elements. In time caulking will start peeling, cracking, and separating from itself. Endangered caulking is vulnerable to cold air flowing through its worn spots. Eroded caulking will permit vermin to get inside your home. Use an expanding foam sealant to cover the openings.

    While we’re on the topic of pipes, did you know water pipes, located under your kitchen and bathroom sinks are also vulnerable to letting in drafts and cold air? The simple solution is to scoot back the escutcheon ring (only there for aesthetic purposes, and ineffective at obstructing air currents), and fill the exposed spaces with expanding foam sealant.

    1. Chimneys a Problem Spot for Air Leaks

    Chimneys are one of the best areas in your home where you can save money on your energy bills. When the fireplace isn’t being used, warm air travels up the chimney to the outside. If you close your chimney flue, it cannot completely block warm air from escaping from your home. The easy solution to this issue is to purchase a chimney balloon. By inflating an appropriately-sized chimney balloon for your chimney, and placing it in the chimney well, you will receive double your investment in one year at an initial cost to energy-savings ratio.

    1. Insulate Your Access Attic Door

    Although your attic may be adequately insulated, vulnerability exists in which warm air can travel through the access door (also known as the hatch). Warping of the attic hatch, or its being blocked by an object will not let the door lie flush against the jamb. This creates pockets, allowing air to come inside the attic. The solution to this problem is to create a tight seal to protect against cold air by tacking fiberglass batt insulation to the interior sides of the attic access door. If you can’t, for any reason, make the door about the jamb secure buy a latch-bolt device to seal the access door firmly.

    1. Unblock Your Heating Registers

    Heating registers must not be blocked by any object, especially heavy objects like furniture resting on them. Placing any object on heating registers hinders heat flowing into the room. Contrive to make your rooms’ arrangements as free of blocking the heating registers as you can.

    1. Lock Your Doors and Windows against the Cold

    Closing your windows and doors is not enough to keep cold air from seeping into your comfortably warm rooms. When you lock your windows and doors you create an air-tight seal where they make contact with the weather-stripping. Make sure to lock your windows early in the day before they freeze in place. Otherwise you will have a devil of a time trying to move them to lock them.

  9. Repair or Replace Your Furnace? The Facts to Consider in Making a Decision

    50

    As a homeowner, you understand the need to do maintenance work on the infrastructure of your home: a fresh paint job every few years, or repairing or replacing your roof are a couple of examples of what it takes to maintain the value of your home in anticipation of the day when you may sell it. Repairing or replacing your HVAC system is another area of concern in maintaining your home and its contents in A-one shape. At some point in time you will need to decide on whether you can continue to make repairs on your heating system to keep it operating longer, or is it time to invest in a new HVAC system, whether it be a new furnace or air conditioner. In this blog we will talk about how to decide to repair, or replace your HVAC heating system.

    Your Furnace’s Age

    Let’s consider how old your heating system is. The lifespan of a furnace varies, according to which HVAC experts you ask. Some say you can expect your furnace to last 10 to 15 years, while others estimate the lifespan to be 15 to 20 years. If your furnace is at least 10 years or older you may need to start repairing it more often.

    Here’s another way to look at it. Replacement of your heating system might be in order if it has exceeded 75% of its lifespan. Which means if your heating system has aged 15 years and you need to spend $750 for a repair it’s not worth it. Better to update to a new model and cash in on the savings you’ll experience with tax credits, rebates, and lower energy bills. Go for broke and don’t be content with a model that has 80% energy-efficiency; buy a model with 95% energy-efficiency. It only makes sense when you realize a model that has almost 100% energy-efficiency is going to pay you dividends in spades. But it’s up to you to decide; we’re only putting out information to help you decide if repair or replacement is better, depending on the age of your system.

    Old Technology vs. New Technology

    Another consideration on whether you should repair or replace is outmoded technology. Older-model technology can’t offer the kind of efficiency and savings on your energy bills newer HVAC models can, plus newer models come with the most advanced features to make the heating system’s operation easier and more convenient.

    Expense to Repair

    Consumer Reports puts out guidelines that say–among other considerations–that when repairs are costing you more than 50% of the expense of a new heating system, it is about the savings to you in the long run that makes it wiser to invest in a new heating system. Besides new heating systems arrive with a warranty to protect you against spending money on repairs if there are any problems while the heating system is under warranty.

    Municipal, State, and Federal Tax Credits

    In purchasing a new heating system you can save even more because you’ll be eligible to receive local and state tax credits. Even a federal tax credit is available, depending on the model you choose. These incentives could add up to as much as 30% of the purchase price of your new higher-efficiency heating system. Factor in savings of 20% to 40% on energy costs, and you can begin to see it’s a no-brainer.

    Here’s another piece of information to chew on. If your old heating system dates from the 1970’s its efficiency rating is around 65%. With current heating system models the efficiency rating jumps to 97%. At this high rate of energy-efficiency that will lower your energy bills significantly; the new heating system will pay for itself over time.

    Power Company Rebates

    There are more savings to be had if your local utility company offers a rebate for buying an energy-efficient heating system. And when you purchase a newer, more efficient model you’ll save on your monthly power bills.

    Environment and its Impact

    If you want to leave less of a carbon footprint it’s wise to upgrade to an Energy-Star-certified heating system that meets, or goes beyond federal regulations on what constitutes energy-efficiency. A fact you should know about: HVAC systems (both heating and cooling) make up approximately 50% of the energy use in your home.

    In an effort to try and stop the depletion of the ozone layer the federal government and the Environmental Protection Agency has authorized phasing out R-22 refrigerant by the year 2020. Buying an R0410A heating system will support the environment as well as help you not spend more money on repairing your old heating system. As R-22 refrigerant becomes less available due to the phase-out it will be more expensive to buy.

    System Performance

    If you’re having to repeatedly re-set the thermostat to remain comfortable; rooms are heating unevenly; the heating system is becoming noisy with sounds like clattering or knocking, snapping or squeaking; or the blower either runs continuously, or repeatedly shuts off-and-on; it’s time to consider replacing your heating system. These symptoms are all signs of a heating system that hasn’t long to go before it expires.

    Effects on Family Health

    An aging heating system may start to show cracks. When this occurs toxic gas, known as carbon monoxide, can infiltrate your home, causing family members to experience nausea, dizziness, headaches and other symptoms flu-like in nature. An emergency such as this requires immediate action to save your family’s health. Throwing open all the windows and doors in your home and leaving the house is vital. Next, you must get the gas shut off by contacting either your fire department or utility company. This is where a service contract can come in handy, because you will be able to get an HVAC repair technician to your home immediately. A service contract usually contains a priority maintenance clause, which means service repair technicians are on-call to provide emergency service 24/7. Better to get the problem taken care of right away than to spend a night in an expensive motel room. Once at your home the HVAC repair technician can advise you whether your heating system only needs repair, or if now is the time to replace it.

    Dry or Dusty Air

    An older heating system is unable to freshen the air, or increase its moisture content to ensure the comfort of you and your family during the winter months. Symptoms of a malfunctioning heating system include a feeling of staleness or stuffiness in the air; the worsening of indoor allergies; or a feeling of dryness in your throat, nose, and on your skin. These indicators mean it’s likely the time to buy a new heating system. Other signs that mean you might need a new heating system are frequent buildup of dust; static shocks; plants that are unhealthy; creaking floorboards and furniture, or a piano that needs more frequent tuning.

    We hope this information has been helpful to you in making a decision on either repairing or replacing your HVAC heating system.